The IS215UCCCS05A is a CPCI Controller Board, manufactured and designed by General Electric as part of Mark VIeS Serie based on UCCC platform.
Marque :
GENuméro d'article :
IS215UCCCS05ADescription :
Mark VIeS Safety Controller BoardOrigine :
USACondition :
NewDimension :
38.9 cm x 23.4 cm x 2.3 cmPoids :
0.8 kgPaiement :
Bank Transfer
GE IS215UCCCS05A Mark VIeS Safety Controller Board
The IS215UCCCS05A controller is a single-board computer that runs the application code. The controller mounts in a CompactPCI (CPCI) enclosure and communicates with the I/O packs through on-board I/O network interfaces. The CPCI enclosure typically consists of a 6U high rack, one or two 3U high power supplies, a 6U high single board, and a cooling fan. The rack backplane is CPCI compliant, but is used only to provide power from the power supply(s) to the controller and cooling fan. The CPCI power supply converts the bulk incoming power to ±12 V dc, 5 V dc, and 3.3 V dc. These voltages are distributed to the controller(s) and fan through the backplane.
The CPCI power supply takes the incoming bulk power from the CPCI backplane and creates ±12, 5, and 3.3 V dc. This power is provided to the backplane through one or two Mate-N-Lok® connectors, for use by the power supply(s), controller(s) and cooling fan. The power supply is a CPCI hot swap compliant 3U power supply using the standard CPCI 47-pin connector. Two power supplies can be used to provide power supply redundancy in an optional rack.
The controller operating system (OS) is QNX® Neutrino®, a real-time, multitasking OS designed for high-speed, high-reliability industrial applications. The following communication ports provide links to I/O modules, operator, and engineering interfaces:
• Ethernet connection for the Unit Data Highway (UDH) for communication with HMIs, and other control equipment. The UCCC controller has an additional Ethernet connection for the Control Data Highway (CDH).
• RS-232C connection for setup using the COM1 port
• Ethernet connection for the R, S, and T I/O network
Technical Specifications
| Item | UCCC Specification |
| Microprocessor | Intel Pentium M processor 1.6 GHz |
| Memory | 256 MB DDR SDRAM through one SODIMM 128 MB CompactFlash Module 256 KB L2 cache Flash-backed SRAM - 8K allocated as NVRAM for controller functions |
| Flash | 128 MB ComactFlash module (GE part #336A5196AAP8) |
| Operating System | QNX Neutrino |
| Programming | Control block language with analog and discrete blocks; Boolean logic represented in relay ladder diagram format. Supported data types include: Boolean 16-bit signed integer 16-bit unsigned integer 32-bit signed integer 32-bit unsigned integer 32-bit floating point 64-bit long floating point |
| Primary Ethernet Interface (2) | Twisted pair 10Base-TX/100Base-TX, RJ-45 connectors: TCP/IP protocol used for communication between controller and toolbox TCP/IP protocol used for alarm communication to HMIs EGD protocol for application variable communication with CIMPLICITY HMI and Series 90-70 PLCs Ethernet Modbus protocol supported for communication between controller and third-party DCS |
| EPMC Ethernet Interface (3 ports) | Twisted pair 10Base-TX/100Base-TX, RJ-45 connectors: TCP/IP protocols used to communicate between controllers and I/O modules |
| COM port | One accessible through RJ-45 connector on front panel For cabling use GE-provided Ethernet cables, which are specifically designed for use in the Mark* controller product family (GE part #342A4931ABP1) |
| Power requirements | 5 V dc (5%, -3%, 4.5 A (typical), 6.75 maximum) 3.3 V dc, (5%, -3%, 1.5 A (typical), 2.0 A maximum) 12 V dc (5%, -3%), 50 mA maximum -12 V dc (5%, -3%), 50 mA maximum |
| Mechanical Specifications | Shock: 10 Gs, 16 ms half sine, 6 axis, 10 pulses each Vibration: 6 Gs rms (20-2000 Hz) random, 0.0185 G2 per Hz |
| † Ambient rating for enclosure design | 0 to 50°C (32 to 122 °F) |
100% brand new and original,All the goods will be tested before shipment.
For the in stock items, we will send the order out within 5-7 days after receive the payment.
Global supplier of quality automation and control components.
Topteng offers a 12-month warranty from the date of delivery.
In the event of non-conforming product ( if damaged or incorrect product is received ),
Any nonconformity must be reported within 7 days of receipt of goods.
Questions? Call +86 18050017653 or Email sales4@nseauto.com
Vraiment une belle expérience quand on peut trouver quelque chose de nouveau et obtenir un bon prix ! J'achèterai certainement à nouveau.
Très bon vendeur produits identiques à ceux décrits dans un très bon emballage et délai de livraison court.
Réponse très rapide à mes demandes de devis et produit expédié rapidement.
La qualité du produit a dépassé mes attentes.
Le support client était exceptionnel.
Continuez à lire, restez informé, abonnez-vous et nous vous invitons à nous dire ce que vous en pensez.
Informations sociales
WhatsApp : +8618050017653
RÉSEAU PRIS EN CHARGE
